Pioneer ANH-P9R-BK - Manual (Page 23)

Navigation
En 23
English
Espa
ñ
ol
Deutsch
F
ran
ç
ais
Italiano
Nederlands
03
Section
The place-distinguishing list is displayed if the
selection is ambiguous.
Select the required place using the rotary stick
and press the
NAVI/OK button to confirm.
The program switches to road or centre entry.
If no roads and only the centre can be selected
in the location entered, the program switches
directly to route menu.
Entering the destination road
Using the rotary stick, select ROAD and press
the NAVI/OK button to confirm.
Select the letters one after the other by turning
the rotary stick and press the
NAVI/OK button
to confirm. The enlarged selected letter appears
at the right of the display.
Using the multifunction button the last
confirmed letter is deleted.
The complete entry is deleted if the multifunc-
tion button
is pressed for more than 2
seconds.
Letters which are already entered are displayed
inversely. For the purpose of support, the exist-
ing entry is displayed at the next road to be
reached. The unit offers only the possible
remaining letters for selection.
If no other entries are available, the unit com-
pletes the road-name.
To accept the entry, press and hold the rotary
stick for more than 2 seconds or select the
small check
✓ and briefly press the
NAVI/OK
button.
If the complete road-name was previously
entered or was automatically completed, the
program switches to either road-distinguishing
list or to route menu.
If an incomplete location entry was confirmed,
the road selection list is displayed.