Pioneer ANH-P9R-BK - Manual (Page 75)

TV Tuner
En 75
Changing a band
• Press BAND/ESC to select the desired band.
Press BAND/ESC repeatedly to switch between
the following bands:
TV 1 — TV 2
TV tuner function menu
The TV tuner function menu has the following
functions:
1 BSSM (best stations sequential memory)
Press BSSM repeatedly to turn BSSM on or
off.
When finished, the display switches to the
preset channel list mode.
2 chLIST (preset channel list)
For operation of the preset channel list, refer
to Selecting channels from the preset channel
list on this page.
Note
• If you do not operate the function within about
30 seconds, the display is automatically
returned.
Selecting channels from the pre-
set channel list
The preset channel list lets you see the list of
preset channels and select one of them to
receive.
1 Press FUNC and then press chLIST to select
the preset channel list mode.
2 Press NEXT to switch between “1” – “6”
and “7” – “12”.
3 Press any of the buttons 1 – 6 (7 – 12) to
recall the desired channel.
Note
• You can also use
2, 3 and 5 to select and
recall the desired channel.
q w
English
Espa
ñ
ol
Deutsch
F
ran
ç
ais
Italiano
Nederlands
09
Section