Pioneer ANH-P9R-BK - Manual (Page 70)

DAB Tuner
Switching the display
• Press DISP to select the desired display.
Press DISP repeatedly to switch between the
following displays:
SERVICE (service label) and COMPONENT (ser-
vice component label) — D.TEXT (dynamic label
segment head line) — SERVICE (service label)
and ENSEMBLE (ensemble label) — SERVICE
(service label) and PTY (PTY label)
Note
• With a service component that has no service
component label or dynamic label, the display
is blank when you switch to service compo-
nent label and dynamic label.
Switching the road traffic flash
and transport flash on or off
• Press TA to turn the road traffic flash and
transport flash on.
The “
3TRFC” or “T” indicator lights.
• Press TA again to turn the road traffic flash
and transport flash off.
Canceling road traffic flash and trans-
port flash interruptions part way
through
• To cancel a road traffic flash or transport
flash interruption and return to the original
source, press the
TA during an announcement
interruption.
Dynamic label function
Displaying dynamic labels
1 Press NEXT to display “D.TEXT”.
Press NEXT until “D.TEXT” appears.
2 Press D.TEXT to switch to the dynamic
label mode.
3 Press
2 or 3 to recall the three latest
dynamic label broadcasts from the tuner’s
memory.
Pressing
2 or 3 switches between the four
dynamic label data displays.
Notes
• Press BAND/ESC to cancel the dynamic label
mode.
• When no dynamic label is currently being
received, “No text” is displayed.
• If there is no dynamic label data stored in the
tuner,
2/3 do not operate.
• If you do not operate the function within about
60 seconds, the display is automatically
returned.
En 70
08
Section