Pioneer ANH-P9R-BK - Manual (Page 54)

RDS
Using radio text
This tuner can display radio text data transmit-
ted by RDS stations, such as station informa-
tion, the name of the currently broadcast song
and the name of the artist.
Notes
• When radio text is received, the “TXT” indica-
tor lights.
• The tuner automatically memorizes the three
latest radio text broadcasts received, replac-
ing text from the least recent reception with
new text when it is received.
• If you do not perform an operation within 30
seconds, the radio text mode is canceled.
Displaying the radio text
1 Press NEXT to display “R.TEXT”.
Press NEXT until “R.TEXT” appears.
2 Press R.TEXT to switch to the radio text
mode.
3 Press
2 or 3 to recall the three latest radio
text broadcasts from the tuner’s memory.
Pressing
2 or 3 switches between the four
radio text data displays.
Notes
• Press BAND/ESC to cancel the radio text
mode.
• When no radio text is currently being
received, “No text” is displayed.
• If there is no radio text data stored in the
tuner,
2 or 3 does not operate.
Storing radio text
You can store data from up to six radio text
transmissions under the buttons
MEMO1 –
MEMO6 .
1 Select the radio text you want to store in
memory.
Refer to Displaying the radio text on this page.
2 Press and hold any of the buttons MEMO1 –
MEMO6 until “RT memo” appears to store the
desired radio text.
The radio text is stored in memory under the
selected button.
Recalling preset radio text
1 Press NEXT to display “R.TEXT”.
Press NEXT until “R.TEXT” appears.
2 Press R.TEXT to switch to the radio text
mode.
3 Press any of the buttons MEMO1 – MEMO6
to recall the radio text preset under that but-
ton.
En 54
05
Section