Pioneer ANH-P9R-BK - Manual (Page 58)

Built-in CD Player
Selecting tracks from the track
title list
The track title list lets you see the list of track
titles on a CD TEXT disc and select one of them
for playback.
1 Press FUNC and then press T.LIST to
select the track title list mode.
2 Press NEXT to display the desired track
title.
Press
NEXT until the desired track title appears.
3 Press the corresponding number button to
select the desired track title.
That selection will begin to play.
Notes
• You can also use
2, 3 and 5 to select and
play the desired track title.
• Only when playing a CD TEXT disc, you can
switch to this mode.
Pausing CD playback
Pause lets you temporarily stop playback of the
CD.
1 Press FUNC and then press PAUSE to select
the pause mode.
2 Press PAUSE to turn the pause on.
The light illuminates. Play of the current track
pauses.
• Press
PAUSE again to turn the pause off.
• When the pause mode is exited while pause is
on, “PAUSE” is displayed in the basic display.
Note
• You can also turn pause on or off by pressing
PAUSE in the following display.
Entering disc titles
Disc title input lets you input up to 48 CD titles
up to 10 letters long into the built-in CD player. If
you input a CD title, the entered title is
displayed.
For details of operation, refer to Entering disc
titles on page 64 under “Multi-CD Player”.
Notes
• When playing a CD TEXT disc, if you switch to
this mode, “No title input” is displayed and
you cannot input the title.
• After the titles for 48 discs have been entered,
the data for a new disc will overwrite the old-
est one.
• If you connect a multi-CD player, you can
input disc titles for up to 100 discs.
En 58
06
Section