Primera Technology LX900 - Manual (Page 7)

C. IDENTIFYING THE PARTS
This illustration shows the front of the printer with its control
buttons and LED indicator lights.
The Pause Button pauses the printer AFTER the printing of the
current label has finished to allow for loading of label stock
and ink cartridge.
The
Power LED indicates that the printer is on and ready to
receive print jobs.
The
Load/Feed Button is pressed in order to load label stock if
the printer does not automatically detect the stock. When
stock is loaded each press of the button will cause one label to
be fed from the printer.
The
Ink Low LED will illuminate when a cartridge has 10% or
less of its ink remaining.
The
Unload Button will unload the installed label stock by
reversing it through the printer. Make sure to tear off the
printed labels before pressing the Unload Button.
The
Label Tear Bar is a serrated edge for conveniently tearing
your finished labels from the printer. The printer comes with a
white tear bar guard. For smoother label feeding, leave the
guard in place during printing. When you are ready to tear off
a label, remove the guard, tear off the label and replace it.
Getting Started 3
Unload Button
Pause Button
Pause LED
Power LED
Load/Feed
Button
Ink Low LED
Label Tear Bar
Top Cover
LX900.qxd 1/14/2010 12:39 PM Page 3
TOC INDEX TOC TOC INDEX