Philips VR605A/58 - Manual (Page 3)

Front of the set
STANDBY m Standby : To switch off or on, interrupt a function, interrupt a programmed recording
(TIMER)
RECORD n Record: To record the programme selected
PROGRAMME r Select: One line or programme number down.
PROGRAMME q Select: One line or programme number up.
STOP/EJECT h/J Pause/Stop, eject cassette: To stop the tape and eject the cassette
PLAY G Playback : To play a cassette
STILL R Still picture: To stop the tape and display the actual position on the tape as a still picture
o Rotary control: turn left: during STOP and STANDBY: rewind, during PLAYBACK: reverse
scanning
turn right: during STOP and STANDBY: wind, during PLAYBACK: forward scanning
Behind the flap at the lefthand corner on the front:
White and red socket
L AUDIO R
Audio input socket left/right : To connect a camera recorder or video recorder
(programme number ’ E3 ’)
Yellow socket
VIDEO
: Video input socket : To connect a camera recorder or video recorder (programme number
’ E3 ’)
Back of the set
4 Mains socket: To connect the mains cable
AUDIO OUT L R Audio output socket, left/right : To connect a HiFi-set
AV2 EXT2 Scart socket 2: To connect a satellite receiver, decoder, video recorder, etc. (programme
number ’ E2 ’)
AV1 EXT1 Scart socket 1: To connect the TV set (programme number ’ E1 ’)
2 Aerial input socket: To connect the aerial cable
3 Aerial output socket: To connect the TV set