Automatic tv channel allocation (follow tv), Automatic tv channel search, Tv01 – Philips VR605A/58 User Manual
Page 10

Automatic TV channel allocation
(Follow TV)
With this function, the video recorder stores the channels in
the same order as on the TV set. This only works if the video
recorder (socket
AV1 EXT1
) and the TV set are connected
with a scart cable.
D You must switch off any equipment connected to
socket
AV2 EXT2
.
a
Switch on the TV set. If required, select the programme
number for the video recorder.
b
Press
MENU
on the remote control. The main menu will
appear on the screen.
MAIN MENU
CLOCK
AUTO TUNING
MANUAL SEARCH
FOLLOW TV
TV CHANNEL ALLOC.
RECORD SPEED
AUTO STANDBY
TV SYSTEM
LANGUAGE
SPECIAL SETTINGS
________________________________
… EXITpMENU
OK
†
c
Select the line ’FOLLOW TV’ with
rP =
or
;P q
and confirm with
OK
. Take notice of the message on the
TV screen.
d
Press
OK
. ’
TV01’ will appear in the video recorder
display.
TV01
e
Select programme number ’1’ on the TV set.
f
Confirm with
OK
on the video recorder-remote control.
The video recorder compares the TV channels on the TV
set and the video recorder.
When the video recorder finds the same TV channel as
the TV set, then it stores it at ’P01’.
D When ’NOTV’ (no signal from TV set) appears in the
display, the TV channels can not be allocated
automatically. In this case, read paragraph: ’Manual
TV channel allocation’.
g
Wait until e.g.: ’
TV02’ appears.
h
Select the next programme number, e.g.: ’2’ on the TV set.
i
Confirm with
OK
on the video recorder-remote control.
D If you have allocated the wrong TV channel, you can
go back one step with
CLEAR (CL)
.
j
Repeat steps
g
to
j
until all TV channels have been
allocated.
k
To end, press
MENU
.
Automatic TV channel search
The video recorder will search for all available TV channels.
D If you want to start the automatic TV channel search
again, then follow the instructions below.
a
Switch on the TV set. If required, select the programme
number for the video recorder.
b
Press
MENU
on the remote control. The main menu will
appear on the screen.
c
Select the line ’AUTO TUNING’ with
rP =
or
;P q
.
d
Confirm with
OK
.
e
Select the country of your residence with
;P q
or
rP =
.
If your country doesn’t show up, select ’OTHERS’.
f
Press
OK
. The ’Automatic TV channel search’ starts.
AUTO TUNING
SEARCHING
00 TV CHANNELS FOUND
ƒƒƒƒƒƒƒ__________________
PLEASE WAIT...
g
When the TV channel search is complete, ’STORED’ will
appear on the screen.
h
To end, press
MENU
.
How to search for a TV channel manually, you can read in the
section ’Manual TV channel search’.
8