Philips VR605A/58 - Manual (Page 11)

Monitor function
You can switch backwards and forwards between TV picture
and video recorder picture with
MONITOR . But this only
works when you use a scart cable to connect the video
recorder to your TV set and if your TV set responds to this
switch-over.
Sorting and clearing TV channels manually
You can assign any programme number to a TV channel that
you have stored and you can also delete unwanted TV
channels.
a Switch on the TV set. If required, select the programme
number for the video recorder.
b Press MENU on the remote control. The main menu will
appear.
c Select the line ’TV CHANNEL ALLOC.’ with rP = or
;P q .
d Confirm with OK .
TV CHANNEL ALLOC.
ALLOCATE ON P01
TV CHANNEL è BBC1 p
________________________________
ALLOCATEpSELECT
EXITpMENU
e With P or Q , select the TV channel you want to
assign a programme number to (starting with ’P01’).
D If you want to delete a TV channel, press
CLEAR (CL) .
f Confirm with SELECT . The following message will briefly
appear on the TV screen: e.g.: ’BBC1 ALLOCATED
ON P01’.
D When you have assigned a programme number to
the last TV channel, you will automatically return to
the main menu when you confirm with
SELECT . To
end, press MENU .
g Repeat steps e to f until you have given a programme
number to all TV channels.
h To end, press MENU .
Setting the language
You can select the language for the on-screen display (OSD).
The small display on the video recorder will only show english
text.
a Switch on the TV set. If required, select the programme
number for the video recorder.
b Press MENU on the remote control. The main menu will
appear.
c Select the line ’LANGUAGE’ and confirm with OK .
d Select your language with rP = or ;P q and
confirm with OK .
This will appear in the display: ’STORED’
e To end, press MENU .
9