Philips BDP7500 MK II - Manual (Page 8)

9
Option 3: Connect to the composite
video jack
1 Connect a composite video cable to:
the • VIDEO jack on this product.
the VIDEO input jack on the TV. •
2 Connect the audio cables to:
the • LINE OUT/AUDIO -L/R jacks on this
product.
the AUDIO input jacks on the TV.
•
Tip
The video input jack on the TV might be labeled as A/V •
IN, VIDEO IN, COMPOSITE or BASEBAND.
Route audio to other devices
You can route the audio from this product to other
devices.
Connect to an HDMI-compliant AV
receiver/amplifier
AUDIO IN
VIDEO IN
HDMI IN
Tip
If the TV has a DVI connector only, connect via an •
HDMI/DVI adaptor. Connect an audio cable for sound
output.
If there is a blank screen under HDMI connection, on the
•
remote control press and then press “731” (numeric
buttons) to recover picture display.
If this product connects to a TV compatible with 1080p
•
or 1080p/24Hz, Philips recommends HDMI category 2
cable, also known as High Speed HDMI cable, for optimal
video and audio output.
To play the digital video images of a BD-video or DVD-
•
video via an HDMI connection, it is necessary that both
this product and the display device (or an AV receiver/
amplifier) support a copyright protection system called
HDCP (high-bandwidth digital content protection
system).
This type of connection provides best picture quality.
•
Option 2: Connect to the component
video jacks
1 Connect the component video cables (not
supplied) to:
the • Y Pb/Cb Pr/Cr jacks on this product.
the COMPONENT VIDEO input jacks •
on the TV.
2 Connect the audio cables to:
the • LINE OUT/AUDIO -L/R jacks on
this product.
the AUDIO input jacks on the TV.
•
Tip
The component video input jack on the TV might be •
labeled as Y Pb Pr or YUV.
Pb Y Pr
AUDIO IN
English
EN