Pride Mobility Jazzy 1104 - Manual (Page 41)

Jazzy 1104 Rev F/Feb03 www.pridemobility.com 41
X I . O P T I O N A L A C C E S S O R I E S
Figure 31. Anti-Scuff Decal
ANTI-SCUFF DECAL
Your Jazzy comes with contoured anti-scuff decals. See figure
31. These decals help protect the rear corners of your Jazzy’s
body shroud. They are made from translucent, textured
polyurethane plastic that provides a tough, attractive finish. Each
piece has an adhesive back for easy application.
To apply your anti-scuff decals:
1. Peel the backing away from the anti-scuff decal.
2. Apply the decal along the contour of the shroud.
The following accessories are available from your local Pride provider.
POSITIONING BELT
WARNING! The positioning belt is not designed for use as a seat belt in a motor vehicle. Nor is your
Jazzy 1104 suitable for use as a seat in any vehicle. Anyone traveling in a vehicle should be
properly belted into seats approved by the auto manufacturer.
The positioning belt is designed to support the operator so that he or she does not slide down or forward in
the seat. The positioning belt is not designed for use as a restraining device. Make sure the belt is secure but
does not cause discomfort.
OXYGEN TANK HOLDER
The removable oxygen tank holder is mounted to the back of the seat by means of the accessory bracket.
CANE AND CRUTCH HOLDER
The removable cane and crutch holder is mounted to the back of the seat by means of the accessory
bracket.
WALKER HOLDER
The removable walker holder is mounted to the back of the seat by means of the accessory bracket. It can
hold a standard size walker.
REAR BASKET
The rear basket is mounted to the accessory bracket. It has a handle that can be used when removing the
basket from your Jazzy 1104.
CUP HOLDER (NOT SHOWN)
The cup holder is mounted to the armrest.