Panasonic PANAFAX DF-1100 - Manual (Page 179)

177
Journals and Lists
Explanation of Contents
(1) Indication of communication mode
(2) Start time of communication
(3) End time of communication
(4) File number
: 001 to 255 (When the communication is stored into memory, a file
number is assigned for each communication.)
(5) Station number : Sequential number of the Stations.
(6) Communication result : ”OK” indicates that the communication was successful.
”BUSY” indicates that the communication has failed because of a busy
line.
”STOP” indicates that [STOP] was pressed during communication.
”M-OK” indicates that the substitute reception message in memory was
not printed out.
”P-OK” indicates that a memory overflow or document misfeeding
occurred while storing the documents into memory for transmission but the
successfully stored document(s) was sent.
”R-OK” indicates that the Relayed XMT or Confidential Communication
was successful.
”3-digit Info Code” (page 187) indicates that the communication has failed.
In this case, the machine will print out the attached report with first page
of your document as shown on the previous page.
(7) Abbreviated number or ң mark : ң mark indicates dialed by direct number dial.
(8) Recorded name in One-Touch,
ABBR. or direct dialing number
(9) Number of pages transmitted or
received
: The 3-digit number is the number of pages successfully transmitted or
received.
When the documents are stored into memory, two 3-digit numbers will
appear. The first 3-digit number represents the number of pages
successfully transmitted. The second 3-digit number represents the total
number of pages which the machine attempted to transmit.
(10) Duration of Communication
07001000002
07001110027
7