Perfectone Net Ware IP 300 - Manual (Page 51)

IP 300 User Manual
51
USING THE IP PHONE
1.To place a call
Call another IP 300 IP phone under the same Gatekeeper:
1. Handset: Pick up the handset and listen for the Internet dial tone. Then dial
the phone number you wish to call and press . Once the call connection
has been established and the ring tone has sounded, wait for the other party to
answer. When the other party answers, you can begin speaking. When the call
is over, put back the handset. The dialed number will be saved into the buffer.
2. Hand free: Press and listen for the Internet dial tone. Then input
the phone number you wish to call and press . Once the call connection
has been established and the ring tone has sounded, wait for the other party to
answer. When the other party answers, you can begin speaking. When the call
is over, Press again. The dialed number will be saved into the buffer.
When you’re using gatekeeper provided by the manufacturer to call a fixed line or mobile
1. Lift the handset from the cradle or press “ SPK ” and listen for the dial tone Note: Upon lifting
the handset, the LCD displays the message Please call…
2. Dial “00” ( or any prefix provided by service provider ) followed by the destination
phone number and press the # key. When dialing a number in North America, always dial 00 +
1 + the area code + the number.
As the IP Phone attempts to connect the call, the LCD displays the message Calling… as well as
the phone number dialed.
If the connection attempt is successful, the Calling message will change to Connected.
After displaying the Connected message, the phone being called will begin to ring. When the
call is answered, you may start talking.
✸✠✹✻✺ ✸✠✹✻✺ ✸✠✹✻✺ ✸✠✹✻✺
✸✎✹✼✺ ✸✎✹✼✺ ✸✎✹✼✺ ✸✎✹✼✺