Perfectone Net Ware IP 300 - Manual (Page 49)

IP 300 User Manual
49
Usage: Load the designated settings to the current position.
Relevant Usage: load 1
Command exit
Syntax description: no keyword and parameter
Usage: Exit from Telnet command window without saving the configuration.
Relevant usage: None
Command write
Syntax description: No keyword and parameter
Usage: Save the configuration and restart the IP-300 IP phone.
Command ping
Syntax description : ping IP address
Usage : ping IP address of other NAT device
Relevant usage: In telnet window, input ping xx.xxx.xx.xx
✴
an IP address
✵
and return, then the result will be displayed. If the address is effective,
✶
ping
OK
✷
will be seen; if the address is ineffective, nothing will be seen. Fox
example:
P:\> ping 203.93.9.57
P:\>
ping OK
P:\> ping 27.56.120.56
P:\>
Note Usually, the echo time of ping command is no more than 1 second. So if the
result is not displayed in 5 seconds, ping command is fail.
ftp command
Syntax description : ftp value