Perfectone Net Ware IP 300 - Manual (Page 39)

IP 300 User Manual
39
huawei system; 14: use kaiman system; 15: use Ngtel system; 16: use
asiainfo system; 17: use Lucent system; 18: use Harbour system 19: use
IPN system; 20: use Yayng system 21: use Thinker system; 22: use
Suntek system; 23: use Sippone system;24 use Ipphonex system; 25
use FED (freeworlddialup) system; 26 use Net2phone system; 27:use
stanaphone system;28: use Txtc system; 29: use Italkbb system.
set nataddr XXXXX
According to system, set IP address of proxy. With SIP protocol used
and proxy stun used, set stun server IP address.
set serviceid XXXXX
Set service ID according to required by service system.
set nattraversal X
Set use proxy or not. X ranged from 0 through 29: 0: do not use proxy.
When the log in server and IP phone in the same LAN, or the log in
system supports the IP phone working behind the LAN; 1: Use proxy.
When the login system does not support IP phone working behind the
LAN, please use this value to search public IP address of the NAT
device. With this item selected, please make port mapping on NAT
device; 2: With Citron private protocol used, use this value to fit into the
GnuGK system transferring the voice and signal by router; 3: use this
value with Auvtech private system used; 4: stun. Use this value with SIP