Perfectone Net Ware IP 300 User Manual
Page 44
IP 300 User Manual
44
through 3: 0: disable dial plan; 1: enable dial plan; 2: use dial number; 3:
use 179XX service.;4: use hotline function.
s
et dialnumber XX
When
set dialplan
value
set as 2, please use this command to set
dial
number.
For example, with eTalk card used, please set it as 00. When
set dialplan
value
set as 4, please use this command to set
hotline
number.
set dddcode XX
Set the area code when set
dialplan
value set as
1
or
2
. For example,
the area code of Beijing is 10; the area code of Shanghai is 21, and the
area code of Chengdu is 28, etc. Parameter xxx must be an Arabic
numeral and no longer than 3 characters.
set iddcode XXX
Set the country code when set
dialplan
value set as
1
or
2
. For example,
the country code of China is 86; the country code of USA is 1, etc.
Parameter xxxx must be an Arabic numeral and no longer than 4
characters.
set iddprefix XX
Set IDD service prefix number when set
dialplan
value set as
1
or
2
. For
example, IDD service prefix number of china is 00; IDD service prefix
number of USA is 1, etc. Parameter xxx must be an Arabic numeral and
no longer than 3 characters.