Panasonic DP-MB350 - Manual (Page 68)

9. Programmable Features
68
Setting the paper input tray
prompt for copy
{#}{ 4 }{ 7 }{ 1 }
This feature will be displayed only when the lower input tray is installed (page
79).
{ 0 } “ Off ”: Deactivates this feature.
{ 1 } “ Auto ” (default): When making a copy, you will be prompted to select the
desired paper input tray if the recording paper size setting is different for the
standard input tray (feature #380 on page 59) and the lower input tray (feature
#382 on page 59).
{ 2 } “ Always ”: When making a copy, you will always be prompted to select the
desired paper input tray.
Note:
L When prompted, select the desired paper input tray by pressing {<} or {>}
repeatedly, then press { Start } .
L Even if “ Auto ” or “ Always ” is selected, this feature will not be activated if
the recording paper type setting (feature #383 on page 60) is set to “ Thick
Paper ”. Change the setting to “ Plain Paper ” or “ Thin Paper ”
beforehand.
Feature/Code Selection