Panasonic WORKIO DP-C262 - Manual (Page 144)

144
Chapter 5 Internet Fax
Adding End Receiving Stations for Relayed Transmission
You can add end receiving stations to the Address Book by the following procedure.
z
If broadcasting to multiple end receiving stations is required, use group dialing. (See page 175)
z
“140 LAN RLY XMT Request” must have been set to “Valid” in Function Parameters (Fax/Emai Settings> Fax
Parameters) to have a LAN relayed transmission request preprogrammed in the address book. For more
operational details, refer to Fax/Email Settings in the Operating Instructions (For Function Parameters) on the
provided CD-ROM.
z For instructions on registration in the address book, refer to Address Book (see page 164).
z You cannot use the address registered for Relayed Transmission for Confidential Communication, Sub-
Address Communication, and Password Transmission. Register an address with out a relayed station. (See
page 165)
1
Press the Function key.
2
Select “Fax/Email Settings”.
3
Select “00 Address Book”.
4
Select “01 Add Telephone Number”.
5
Enter a fax number, and then select
“OK”.
z Select “Clear” to delete the fax number one
digit at a time.
z For using the onscreen keyboard, refer to
Manual Dialing (see page 16).