Pioneer Elite PureVision PRO 1140HD - Manual (Page 91)

91
En
Useful Remote Control Features 13
En
gl
is
h
Manufacturing Reset
All learned and preset codes can be returned to the factory
defaults regardless of the mode.
1
Press EDIT/LEARN and TV a at the same time. The Mode
switch setting is ignored.
• The LED indicator flashes and the remote control unit
enters the Manufacturing Reset mode.
2
Press D (yellow) to reset the remote control.
• The manufacturing reset is complete. The LED flashes
for one second then the remote control unit returns to
normal operation.
NOTE
• To exit the Edit mode before it is complete, press EDIT/
LEARN again.
• If the Mode switch selection is changed when in the Edit
mode, the Edit session is canceled.
• If no operation is performed within one minute, the Edit
session is canceled.
• When you enter an unlisted code, the LED flashes
repeatedly.
• If the tables on pages 92 to 96 do not include your device’s
manufacturer or the remote control does not work, use the
Learn mode.
• The initial mode is “PIONEER”.
• When using any of the receiver buttons ( a, INPUT, or
VOL +/–) to cancel the Learn mode, follow the procedure
with the
Mode switch set to “TV”. You cannot cancel the
mode otherwise.
PDP_PRO1140HD.book Page 91 Monday, June 5, 2006 5:22 PM