Pioneer Elite PureVision PRO 1140HD - Manual (Page 27)

27
En
Basic Operations 06
En
gl
is
h
Setting MTS/SAP mode
When watching conventional TV programs, use the Multi-
channel Television Sound (MTS) function to enjoy stereo sound
and/or Secondary Audio Programs (SAP).
• Stereo broadcasts
Sports, shows, and concerts can be shown with dynamic
stereo sound.
• SAP broadcasts
MAIN sound: The normal program soundtrack (either in
mono or stereo).
SAP sound: Listen to a second language, supplementary
commentary and other information. (SAP is mono sound.)
NOTE
• Conventional TV channels: TV channels received through the
conventional VHF/UHF frequencies or conventional cable TV
channels
• When stereo sound is difficult to hear, manually switch to
MONO for clearer sound.
• Once MONO is selected, the Plasma Display sound remains
mono even if the system receives a stereo broadcast. You
must reselect STEREO to hear stereo sound again.
• Selecting MTS while the source is from an INPUT (1 to 6) or
a PC does not change the type of sound. The video source
determines the type of sound.
Press MTS to cycle through the types of sound.
NOTE
• The MTS button is disabled while the TV Guide On Screen™
system is displayed.
• In each of the sound types, the display changes according to
the broadcast signals.
When receiving STEREO sound signals
When receiving MONO + SAP sound signals
When receiving STEREO + SAP sound signals
When receiving MONO sound signals
STEREO
STEREO mode
SAP
SAP mode
MONO
MONO mode
A 125
STEREO In STEREO mode
In SAP mode
In MONO mode
A 125
STEREO
A 125
MONO
In STEREO mode
In SAP mode
In MONO mode
A 125
MONO (SAP)
A 125
SAP (MAIN)
A 125
MONO (SAP)
In STEREO mode
In SAP mode
In MONO mode
A 125
STEREO (SAP)
A 125
SAP (STEREO)
A 125
MONO (SAP)
In STEREO mode
In SAP mode
In MONO mode
A 125
MONO
A 125
MAIN
A 125
MONO
PDP_PRO1140HD.book Page 27 Monday, June 5, 2006 5:22 PM