Pioneer Elite PureVision PRO 1140HD - Manual (Page 31)

31
En
TV Guide On Screen™ System Setup 07
En
gl
is
h
Screen 2: Enter ZIP or Postal Code
• If you selected USA in Screen 1, you see the ZIP Code screen.
• Input ZIP Code.
Press the number keys or use / to display a number
then / to move to another field.
• Press ENTER to display Screen 3.
• If you selected Canada in Screen 1, you see the Postal Code
screen.
• Input Postal Code by pressing / to display a character or
number then / to move to another field.
• Press ENTER to display Screen 3.
Screen 3: Do you have Cable?
• If you select “Yes”, you see Screen 4.
• If you select “No”, you see Screen 5.
Screen 4: Which input terminal is the system plugged
into?
• Select “ANT/CABLE A IN” or “ANT B IN” (automatically
advances to Screen 5 after the selection)
Screen 5: Do you have an antenna connected?
• If you select “Yes”, you see Screen 6. (Depending on your
setup configuration, you may see an additional screen. After
that screen, you see Screen 6.)
• If you select “No”, you see Screen 6.
NOTE
• If you selected “No” in Screen 3 then you must select “Yes” in
this screen to receive a channel lineup and listings.
Screen 6: Are the settings correct?
• If you select “Yes”, you see Screen 7.
• If you select “No”, you see Screen 1.
Screen 7: Congratulations
• Press
ENTER to display Screen 8.
PDP_PRO1140HD.book Page 31 Monday, June 5, 2006 5:22 PM