Paradyne 6211-I1 - Manual (Page 19)

6211 ADSL Router User’s Guide
5. and then click on TCP/IP in the Network Protocols
6. C
Click on Microsoft in the Manufacturers list box,
list box.
lick on to return to the Network dialog box, and then click on again.
prompted t llow the instr
7. C
You may be o install files from your Windows 95/98 installation CD. Fo uctions to
install the files.
lick on to restart the PC and complete the TCP/IP installation.
g your P Network icon. 8. After restartin C, open the Control Panel window, and then click on the
9. Select the network component labeled TCP/IP, and then click on .
If you have multiple TCP/IP listings, select the listing associated with or adap your network card ter.
10.
e an address between 192.168.1.3
12.
In the TCP/IP Properties dialog box, click on the IP Address tab.
11. Click in the radio button labeled Use the following IP address. Typ
and 192.168.1.254 in the IP Address field and 255.255.255.0 in the Subnet Mask field
Click on twice to confirm and save your changes. You will be prompted to restart
Please click Windows. on and restart your PC.
Windows® NT 4.0 workstations:
k on the Start button, point to Settings, and then click on Control
2. ontrol Panel window, double click on the Network icon.
ork protocols. If the list includes TCP/IP, the
4. nent, click on
1. In the Windows NT task bar, clic
Panel.
In the C
3. In the Network dialog box, click on the Protocols tab.
The Protocols tab displays a list of currently installed netw
protocol has already been enabled. Skip to step 9.
If TCP/IP does not appear as an installed compo .
5. In the Select Network Protocol dialog box, select TCP/IP, and t n hen click o .
You may be prompted to install files from your Windows NT installation CD or ot Fo her medium. llow the
ndow appears to inform you that a TCP/IP service called DHCP can be set
6.
instructions to install the files.
After all files are installed, a wi
up to dynamically assign IP information.
Click on to continue, and then click on , if prompted, to restart your
7. ting your PC, open the Control Panel window, and then double-click on the Network icon.
computer.
After restar
8. In the Network dialog box, click on the Protocols tab.
9. In the Protocols tab, select TCP/IP, and then click on .
10. In the Microsoft TCP/IP Properties dialog box, click n l on the radio butto abeled Use the following
11.
IP address. Type an address between 192.168.1.3 and 192.168.1.254 in the IP Address field and
255.255.255.0 in the Subnet Mask field.
Click on twice to confirm and save your changes, and then close the Control Panel.
6211-A2-GB21-00 November 2004 19