Getting started, Connecting the hardware – Paradyne 6211-I1 User Manual
Page 14
6211 ADSL Router User’s Guide
3
Getting Started
This chapter provides basic instructions for connecting the 6211 ADSL router to a PC or LAN, and to the Internet via
ADSL.
Part 1 provides instructions to set up the hardware.
Part 2 describes how to configure Internet properties on your PC.
Part 3 shows you how to access your 6211 ADSL router.
It is assumed that you have subscribed to ADSL service with your Internet service provider (ISP). These instructions
provide a basic configuration that should be compatible with your home or small office network setup. Refer to the
subsequent chapters for additional configuration instructions.
Connecting the Hardware
This section describes how to attach the router to an ADSL line, the power outlet, and your computer or network.
WARNING
Before you begin, turn the power off for all devices. These include your
computer(s), your LAN hub or switch (if applicable), and the 6211
ADSL router.
04-17510
LINE
LAN
POWER
PHONE
USB
OR
1
2
3
4
DEFAULT
RESET
The figure above illustrates the hardware connections. Read the following for specific instructions.
14 November 2004 6211-A2-GB21-00