Paradyne 6211-I1 - Manual (Page 18)

6211 ADSL Router User’s Guide
16. In the Local Area Connection Properties dialog box, select Internet Protocol (TCP/IP), and then
click on .
17. In the Internet Protocol (TCP/IP) Properties dialog box, click on the radio button labeled Use the
following IP address. Type an address between 192.168.1.3 and 192.168.1.254 in the IP Address field
and 255.255.255.0 in the Subnet Mask field.
18. Click on twice to confirm and save your changes, and then close the Control Panel.
Windows® ME PCs
1. In the Windows task bar, click on the Start button, point to Settings, and then click on Control Panel.
2. Double-click on the Network and Dial-up Connections icon.
3. In the Network and Dial-up Connections window, right-click on the Network icon, and then select
Properties.
The Network Properties dialog box displays a list of currently installed network components. If the
list includes Internet Protocol (TCP/IP), the protocol has already been enabled; skip to step 11.
4. If Internet Protocol (TCP/IP) does not appear as an installed component, click on .
5. In the Select Network Component Type dialog box, select Protocol, and then click on .
6. Select Microsoft in the Manufacturers box.
7. Select Internet Protocol (TCP/IP) in the Network Protocols list, and then click on .
You may be prompted to install files from your Windows Me installation CD or other media. Follow the
instructions to install the files.
8. If prompted, click on to restart your computer with the new settings.
9. After restarting your PC, double-click on the Network and Dial-up Connections icon in the Control
Panel.
10. In Network and Dial-up Connections window, right-click on the Network icon, and then select
Properties.
11. In the Network Properties dialog box, select TCP/IP, and then click on .
12. In the TCP/IP Settings dialog box, click on the radio button labeled Use the following IP address.
Type an address between 192.168.1.3 and 192.168.1.254 in the IP Address field and 255.255.255.0 in
the Subnet Mask field
13. Click twice to confirm and save your changes, and then close the Control Panel.
Windows® 95, 98 PCs:
1. In the Windows task bar, click on the Start button, point to Settings, and then click on Control Panel.
2. Double-click on the Network icon.
The Network dialog box displays a list of currently installed network components. If the list includes
TCP/IP, the protocol has already been enabled. Skip to step 9.
3. If TCP/IP does not appear as an installed component, click on . The Select Network
Component Type dialog box appears.
4. Select Protocol, and then click on .
The Select Network Protocol dialog box appears.
18 November 2004 6211-A2-GB21-00