Pentax OPTIO M10 - Manual (Page 80)

78
4
Tak
ing Pi
cture
s
R C
You can take pictures in natural colors by adjusting the white balance
according to the light conditions at the time of shooting.
White Balance
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
Use the four-way controller (23) to select [White Balance].
3
Press the four-way controller (5).
The White Balance screen appears.
4
Use the four-way controller (23)
to change the setting.
5
Press the 4 button.
The White Balance setting is saved.
6
Press the MENU button.
The camera returns to capture status with the current setting.
Refer to “Manual Setting” (p.79) for instructions on adjusting the white
balance manually.
Adjusting the White Balance
F
Auto The camera adjusts the white balance automatically.
G
Daylight Use this mode when taking pictures outside in sunlight.
^ Cloudy Use this mode when taking pictures outside on a cloudy day.
I
Tungsten Light
Use this mode when taking pictures under electric or other
tungsten light.
J
Fluores. Light Use this mode when taking pictures under fluorescent light.
K
Manual Use this mode when adjusting the white balance manually.
Saving the White Balance 1p.86
MENU
R e c . M o d e
MENU E x i t E x i t E x i t
1 / 3
6 M Recorded Pixels
Q u a l i t y L e v e l
W h i t e B a l a n c e
F o c u s i n g A r e a
S e n s i t i v i t y
AWB
ISO
AUTO
1, 6
2, 3, 4
5
MENU
W h i t e B a l a n c e
A u t o A u t o A u t o
C a n c e l C a n c e l C a n c e l OK O K O K O K