Pentax OPTIO M10 - Manual (Page 73)

71
4
Tak
ing Pi
cture
s
Setting the Shooting Functions
A R A X q < I i \ Q E D >
Focus Mode
1
Press the four-way controller (5)
in A mode.
The focus mode changes each time the
button is pressed. You can also change the
setting using the four-way controller (23).
2
Press the 4 button.
The Focus Mode setting is saved and the
camera returns to capture status.
Selecting the Focus Mode
= Standard
Use this mode when the distance to the subject is 40 cm
(15.7 in.) or more. The camera is focused on the subject
in the autofocus area when the shutter release button is
pressed halfway.
q Macro
This mode is used when the distance to the subject is
approx. 10 cm to 60 cm (3.9 in. to 23.6 in.). The camera is
focused on the subject in the autofocus area when the
shutter release button is pressed halfway.
s Infinity
This mode is used for taking distant objects. The flash is
set to a (Flash Off).
\
Manual Focus This mode lets you adjust the focus manually.
• In y mode, the focus mode is set to s.
• In A mode, you can only select = and q.
Manual Focus 1p.72
Saving the Focus Mode 1p.86
1
2
F o c u s M o d e F o c u s M o d e F o c u s M o d e
S t a n d a r d S t a n d a r d S t a n d a r d
OK O K O K O K