Pentax OPTIO M10 - Manual (Page 39)

37
1
Gettin
g
Sta
rte
d
9
Press the 4 button.
The camera returns to capture status.
Language, Date and Time can be changed. Refer to the pages below for
instructions.
• To change the language, follow the steps in “Changing the Display
Language” (1p.135).
• To change the date and time, follow the steps in “Changing the Date
and Time” (1p.133).
When the Initial Setting or Date Adjust screen is displayed, you can
cancel the setting operation and switch to Capture mode by pressing
the 3 button. In this case, the Initial Setting screen will appear
next time you turn the camera on.
If you press the 4 button in Step 9, the camera clock is reset to 00
seconds. To set the exact time, press the 4 button when the time
signal (on the TV, radio, etc.) reaches 00 seconds.
The video output format is set to the format of the country or region selected in
[Language/
] on the Initial Setting screen. You can change the setting.
(p.138)