Pentax OPTIO M10 - Manual (Page 65)

63
4
Tak
ing Pi
cture
s
R q < I i \ Q E D >
In this mode, pictures are taken continuously for as long as the shutter
release button is pressed.
1
Press the four-way controller (2) in A mode.
2
Use the four-way controller (45)
to select 1 (Continuous Shooting)
and press the 4 button.
The camera is ready to take a series of
pictures.
3
Press the shutter release button
halfway.
The focus frame on the LCD monitor turns green if the subject is in
focus.
4
Press the shutter release button fully.
Pictures are taken continuously for as long as you keep the shutter
release button pressed.
Taking a Series of Pictures
1
Continuous
Shooting
Each time a picture is taken, the image is saved in the memory
before the next image is taken. The higher the image quality, the
longer the interval between shots.
• The flash will not discharge in Continuous Shooting mode.
• The continuous shooting function is not available in A, A, C, O,
X or y mode.
• You can continue shooting until the memory capacity of the SD
Memory Card or built-in memory is full.
• The interval of continuous shooting will vary according to the
Recorded Pixels and Quality Level settings.
• The focus, exposure and white balance are locked with the first image.
3, 4
1, 2
2
D r i v e M o d e D r i v e M o d e
C o n t i n u o u s S h o o t i n g C o n t i n u o u s S h o o t i n g
D r i v e M o d e
C o n t i n u o u s S h o o t i n g
O K O K O K OK