Paradyne 3825PLUS - Manual (Page 42)

COMSPHERE 3825Plus Modem
4-16 January 1999 3825-A2-GB30-40
Table 4-1
(14 of 14)
3825 Plus AT Commands
\T n

No Data Disconnect Timer
Forces the modem to disconnect if no data is transmitted or received within a specified amount of time.
\T, \T0 Disable. \T2 is the default for Denmark, and \T3 is the default for France and Germany. See Appendix F.
\T n Where n is a value from 1 to 255 in 1-minute increments.
\ X n

XON/XOFF Passthrough Flow Control
The way this configuration option functions depends on how the modem is configured for flow control.
When the modem is configured for XON/XOFF flow control (see \Q n, Flow Control of DTE), this configuration option
determines if flow control characters received from the local DTE will be passed on to the remote modem.
If configured for modem-to-modem flow control (see \G – Modem to Modem Flow Control), this configuration option
determines if flow control characters received from the line will be passed on to the DTE.
\X, \ X0 Disable.
\ X1 Enable.