45 min, Other functions, Tuning to radio stations – Philips LX3750 User Manual
Page 27: Presetting radio stations, Listening to preset radio stations, Sleep timer setting

27
English
Tuning to radio stations
1
Press STANDBY ON to switch on the last selected
source.
2
Press SOURCE (or press TUNER) to select TUNER
mode.
3
Press TUNER again to select the desired band : FM or
AM.
4
Press and hold
S or T until the frequency indication
starts to change, then release.
➜ The system automatically tunes to the next strong radio
station.
● To tune to a weak station, press
S or T briefly and
repeatedly until an optimal reception found.
5
Repeat step 4 if necessary until you find the desired radio
station.
Presetting radio stations
You can preset up to 40 stations regardless of the
reception.
1
Tune to your desired radio station (refer to “Tuning to radio
stations”).
2
Press PROGRAM.
➜ “PROGRAM” appears.
3
Use the numeric keypad (0-9) to select the desired
preset number.
Other Functions
O
THER
F
UNCTIONS
Note:
– If “PROGRAM” icon goes off before you select the desired
preset number, press PROGRAM again.
4
Press PROGRAM again to store the radio station.
➜ “PROGRAM” icon stops flashing.
● Repeat steps 1–4 to store other radio stations.
Notes:
– The old stored content in the selected address will be
covered when you operates the unit as above.
– During programming, if no key is pressed within five
seconds, the system will exit the program mode automatically.
Listening to preset radio
stations
● In tuner mode, press
1 or 2 or use the numeric keypad
(0-9) to select the desired preset number.
➜ The preset number, radio frequency, and waveband are
displayed.
Sleep timer setting
The sleep timer enables the system to switch to standby
mode automatically at a preset time.
1
Press SLEEP repeatedly to select a preset time.
➜ The selections are as follows (time in minutes):
15 ™ 30 ™ 45 ™ 60 ™ 90 ™ 120™ OFF ™ 15...
2
When you reach the desired length of time, stop pressing
the SLEEP button.
➜ “SLEEP” icon appears.
To check the remaining length of time after sleep
timer is activated
● Press SLEEP once.
To change the preset sleep timer
● Press SLEEP again while the remaining sleep timer is
shown.
➜ The display will show the next sleep timer options.
To deactivate the sleep timer
● Press SLEEP repeatedly until "
OFF" is displayed, or press
the STANDBY ON button.
SUB
SLEEP
45 MIN
SUB
FM 103.50
SUB
PROGRAM
P00 103.50
SUB
PROGRAM
P01 103.50