Operations, Discs information, Basic playback – Philips LX3750 User Manual
Page 22

22
English
Discs information
● DVD video discs may have one or more Titles, and each
Title may have one or more Chapters.
● Playback stops at the end of each Title.
● Video CDs may have one or more Tracks, and each Track
may have one or more Indexes.
● To make easy and convenient access, you can move
between Tracks and Indexes.
● Some Video CDs have Play Back Control (PBC), which is a
predefined playback sequence stored on the disc (refer to
“Special VCD/SVCD features”).
● Audio CDs contain only Tracks.
Basic playback
IMPORTANT!
–
Do not move the DVD system during
playback, doing so may damage the DVD system.
–
Do not push on the disc tray or put any
objects other than disc on the disc tray, doing so
may cause the DVD system malfunction.
–
DVD discs and players are designed with
regional restrictions. Before playing a disc, make
sure the disc is the same zone as your player.
–
Depending on the DVD or VIDEO CD, some
operations may be different or restricted.
1
Press STANDBY ON y to switch on the system.
2
Press OPEN/CLOSE to open the disc tray.
3
Load a disc with the label side facing
up.
4
Press OPEN/CLOSE again to
close the tray.
➜ There will be a short delay while
the player identifies the disc and
reads the menu from the disc.
● Some discs will start playing automatically, others will display
the Disc Contents Menu on the TV screen. If the menu is
presented, use
3 / 4/ 1 / 2 keys to highlight your selection
and press OK to confirm.To select a play option, press
numeric keypad (0-9).
5
PressÉÅ to start playback.
O
PERATIONS
Operations
Notes:
–
If the inhibit icon (or X) appears on the TV screen when
a button is pressed, it means the function is not available on
the disc you are playing.
To interrupt playback
● PressÉÅ.
➜ The picture freezes and the sound will be muted.
● To resume playback, pressÉÅ again.
To stop playback
● Press Ç.
Skipping to another title (track) / chapter
● Press
S or T repeatedly during playback to skip
backward or forward. Each press will take the disc to the
beginning of the previous or next title ( track) / chapter.
Note:
– If the REPEAT - TRACK function has been set, pressing
S or T will replay the same title ( track) / chapter.
To skip to the beginning of the current title (track)
/ chapter during playback
● Press
S once.
To go directly to any title (track) / chapter
● Use the numeric keypad (0-9) to enter the number of
the desired title ( track) / chapter.
Fast Search
1
Hold down
S or T for about more than 1 seconds
to fast reverse or forward the disc.
2
To resume normal play, pressÉÅ .
Continue playback from the last stop point
● In stop mode and when a disc has not been removed, press
RESUME to resume playback from the point at which it
stopped.
To cancel the resume mode
● Press Ç again.
Notes:
– When the player is disconnected from the power supply or
the disc tray is opened, the resume option will be cancelled
automatically.
– When PBC is ON resume mode is not available.
– The resume mode may not be available on some disc.
VIDEO CD
TRACK 1 TRACK 2
INDEX 1
INDEX 2
INDEX 1
INDEX 2
INDEX 3
DVD-VIDEO DISC
TITLE 1 TITLE 2
CHAPTER 1
CHAPTER 2
CHAPTER 1
CHAPTER 2
CHAPTER 3