Panasonic JOIP BB-GT1540E - Manual (Page 62)

Answering System
62 For product assistance, visit www.globarange.com
For A assistance, visit www.joip.com
Operating the answering
system
*1 If pressed within the first 5 seconds of
a message, the previous message is
played.
Erasing all messages
Press {4} 2 times while the unit is not
being used.
L
All messages including voice memos
are erased.
Erasing all messages for the desired
line(s)
1 Press {IP/TEL} repeatedly until the
display shows the desired line(s)
(n and/or m).
2 Press {4} 2 times.
Listening to messages
using the handset
When new messages have been
recorded:
– “New message” is displayed.
– The message indicator on the handset
flashes slowly if the message alert
feature is turned on (page 66).
1
K i 0
L The handset plays new messages
including voice memos.
L When you have no new
messages, the handset plays
back all messages.
2 When finished, press {i}.
Note:
L
You can also listen to the messages
as follows:
To play new messages:
K
i {#}{3}{2}{3}
To play all messages:
K
i {#}{3}{2}{4}
L To switch to the receiver, press {s}.
Calling back (Caller ID subscribers
only)
If Caller ID information was received for
the call, you can call the caller back
while listening to the message.
1 Press M during playback.
L
To edit the number before calling
back, press {. Then add or
erase digits to the beginning of
the number by pressing the
desired dial key or ^.
2 Press ].
L
The indicated line is selected.
L You can also select the line by
pressing {TEL} or {IP}.
Key Operation
{>} /{<} Adjust the speaker
volume
(during playback)
{ <} Repeat a message
(during playback)
*1
{ >} Skip a message
(during playback)
{
■} Pause a message
– To resume playback,
press {6} (centre of
navigator key).
– To stop playback
completely, press
{
■} again.
{ 4} Erase message
currently playing
GT15xxE.book Page 62 Wednesday, August 1, 2007 11:59 AM