Panasonic JOIP BB-GT1540E - Manual (Page 24)

Preparation
24 For product assistance, visit www.globarange.com
For A assistance, visit www.joip.com
Amber On L The base unit’s IP address may conflict with the IP
addresses of other devices on your local network.
Check the base unit’s static IP address using the
handset: K i {#}{5}{0}{1}, then check the IP
addresses of the other devices on your local
network. If necessary, change the base unit’s static
IP address (page 30).
Flashing
L
The base unit is obtaining an IP address or is
obtaining configurations from the A service.
Please wait.
L The base unit is registering with the A service.
Please wait.
L If the 4 indicator continues flashing, check the
following:
– Check the base unit’s IP address using the
handset: K i {#}{5}{0}{1}
If necessary, change the base unit’s static IP
address (page 30).
– If an IP address was not acquired, check your
network devices’ (router, modem, etc.)
connections. If the connections are made
properly but the problem persists, check your
network devices’ (router, modem, etc.) settings.
– Many installation issues can be resolved by
resetting all the equipment. First, shut down your
modem, router, base unit, and computer. Then
turn the devices back on one at a time in this
order: modem, router, base unit, computer.
– If you cannot access Internet Web pages using
your computer, check to see if your Internet
service provider is having connection issues in
your area.
– For more troubleshooting help, visit www.joip.com
or contact the A service provider.
Flashing
rapidly L Unplug the base unit’s AC adaptor to reset the unit,
then reconnect the AC adaptor. If the 4 indicator is
still flashing rapidly, there may be a problem with the
base unit hardware. Contact Panasonic service
personnel.
Status Meaning
Colour Light pattern
GT15xxE.book Page 24 Wednesday, August 1, 2007 11:59 AM