Panasonic RAMSA WR-DA7 - Manual (Page 9)

1 - 3
Windows Version
1. Copy the files for installation file (DA7UPINS.EXE) to folder on to your
hard drive.
2. Double–click on “DA7IPINS.exe”, If you are "unzipping" the file, you can
unzip it. The installation file installs the upgrade utility in
“C:\UpgradeDA7”.
3. Once you have loaded the file, you need to open the folder to gain access
to the following files:
DA7UPG.exe - Executable file of the Upgrade Utility
V200R23.mot - Upgrade file for the DA7
CNV - Data Conversion folder for old backup versions
BKUP - Backup Data folder
4. Click on "DA7UPG.exe" to open the utility.
5. Test the communication path between the computer and your DA7 by
clicking on the "VERSION" button on your computer in the open window.
If it is properly connected, you will see the version of software that is
currently in your DA7 displayed, and the BACKUP and RESTORE buttons
will become active. (You need to set up DA7 and Upgrade Utility
Configuration before test. To set up Configuration, read the following
chapter “Cables and Connections”, “Setting up the DA7”, and “[Setup]” in
“Operating the DA7 Upgrade Utility”.)