Panasonic RAMSA WR-DA7 - Manual (Page 30)

2 - 4
1. New Bi-directional communication mode from the MIDI REMOTE.
Previous Versions: The DA7 would only transmit MIDI data, as assigned in
the [MIDI>MIDI RMT] Window. It could not receive MIDI Control Change
Messages.
Version 2.0: The DA7 can now transmit and receive MIDI data. Settings in
the [MIDI>MIDI CTRL ASGN] window can now be changed by receiving
external Control Change Messages from an outside MIDI controller.
2. New visual indicators in Automation with Surround.
Previous Versions: The cursor display for recording Surround Automation
information was displayed only in a single color, making visual indication
between playback and record difficult.
Version 2.0: The Surround Automation Window now displays two types of
pointers in the Jog&Fader and Pattern Modes. During playback, a black
pointer will indicate the playback data. While a white pointer indicates the
real-time operations. While recording automation, the black pointer indicates
the data that is being recorded in real time, and the white pointer indicates
data that was recorded previously. With this modification, you can punch in
and out of record more easily in the Surround Sound Mode.
3. New monitoring functions in the Surround Mode.
Previous Versions: There are several different combinations listed below.
Version 2.0: When the SURROUND MONITOR is ENABLED from the
[SOLO/MONITOR] window, and the MONITOR buses are being used for
monitoring Surround information, then selecting one of the source buttons,
such as L/R, 2TR A, or AUX, in Monitor A or B, will MUTE the other output
buses.
Note: Remember, in Surround, MONITOR A L/R is Front Left/Right,
MONITOR B L/R is Center/Sub, and MASTER L/R is Surround L/R.
When you cancel the source for the selected MONITOR, normal Surround
Monitor mode returns.
Previous Versions: Using a channel SOLO button in the Surround Mode did
not mute all buses.
Version 2.0: If a channel SOLO is selected in the Surround Monitor mode,
all of the bus outputs except the MONITOR A outputs are muted. When you
cancel the SOLO mode, the normal Surround Monitor mode returns.