Panasonic RAMSA WR-DA7 - Manual (Page 38)

2 - 1 2
26. New factory default settings in the [UTILITY>USER CUSTOM]
window.
Previous Versions: The factory default settings in the [UTILITY>USER
CUSTOM] window followed the channels themselves, i.e. CHANNEL ONE was
assigned to CHANNEL ONE, etc. There was not a NONE selection.
Version 2.0: The factory default settings in the [UTILITY>USER CUSTOM]
window are NONE. You can now assign NONE to a channel, avoiding
doubled channel assignments, such as CHANNEL 12 assigned to CHANNEL
ONE and CHANNEL 12.
27. The Selected CHANNEL number is now displayed at all times.
Previous Versions: The currently selected CHANNEL number was not shown
on the LCD display at all times.
Version 2.0: The currently selected CHANNEL number is now displayed in
the upper left corner of the LCD display on all screens at all times,
28. New visual indication of LINKED CHANNELS.
Previous Versions: The LINKED CHANNELS were visually indicated in the
LCD display only.
Version 2.0: One of the SELECT LED's of the linked channels will flash to
display the CHANNEL that is selected when the CHANNELS are linked in
stereo or dual mono. This gives you a visual indication that the channels are
linked together, and lets you know which channel you are currently have
selected in the LCD window and the central channel strip.
29. Dynamics settings are saved when switching from COMP+GATE to
EXPANDER.
Previous Versions: When switching between the COMP+GATE and the
EXPANDER functions in the [DYNAMICS] window, the settings were reset to
the default values.
Version 2.0: All settings are now saved when you switch the DYNAMICS
functions from COMP+GATE to EXPANDER. Parameters such as
THRESHOLD, RATIO, and ATTACK, no longer reset to factory defaults when
you switch between the functions.