Panasonic RAMSA WR-DA7 - Manual (Page 39)

2 - 1 3
30. Improved Surround LCD Screen display.
The screen re-draw time has been improved in V2.0 when in the Surround
Sound mode. (e.g. using Auto Move function),.
31. Slot 2 and Slot 3 can now accept AES/EBU cards as the word clock
master.
Previous Versions: When the AES/EBU card (WR-AESS) was installed in slot 2
or slot 3, it appeared as if the card could be selected as word clock master,
however it was not actually selected.
Version 2.0: When the AES/EBU card (WR-AESS) is installed in slot 2 or slot
3, it can be selected as word clock master.
32. Improvement of the metering in the LCD display.
Previous versions: The levels displayed on the meters in the METER
window of the LCD screen was different from that of the Meter Bridge.
Version 2.0: The levels displayed on the meters in the METER window of the
LCD screen are now the same as the Meter Bridge
33. Correction for the output level of the Oscillator.
Previous Versions: The output level of the Oscillator was 0.8dB lower than
the level that was displayed in the Oscillator window.
Version 2.0: The output of the Oscillator is now correct.
34. Correction in the display of MMC command.
Previous Versions: When the STOP command was sent, was
displayed, and when the PAUSE command was sent, was displayed
in the bottom right of the LCD screen.
Version 2.0: Now when the STOP command is sent, is displayed,
and when the PAUSE command is sent, is displayed in the bottom
right of the LCD screen