Pfaff 1540 User Manual
Page 68

66
35. Adjustment of bobbin winder stop
Requirement:
The bobbin winder must stop when the thread has reached a level of 1 mm below the bobbin rim.
Check:
z
Wind a bobbin and check that the winder stops as required.
Adjustment:
z
Loosen screw 123 (fig. 72).
z
Position stop 124 to the left for less thread and to right for more thread.
z
Tighten screw 123.
Cross-check:
z
Wind a bobbin and check that the winder stops as required.
This manual is related to the following products: