Pioneer VSX-416-S/-K - Manual (Page 42)

Using the tuner 08
42
En
2 Press ‘T.EDIT’ (VSX-516 model) / (SHIFT +)
TUNER EDIT (VSX-416 model).
A cursor appears at the first character position.
3 Input the name you want then press ENTER.
Names can be up to four characters long.
• Use the MULTI JOG dial (front panel) or the
ST +/– (VSX-516 model) / STATION +/– (VSX-
416 model) buttons (remote) to select
characters, and ENTER to confirm. If no
character is input, a space is input.
Tip
• Once you have named a station preset, you
can press (SHIFT +) TUNER DISP (VSX-516
model) / DISPLAY (VSX-416 model) when
listening to a station to switch the display
between the name and the frequency.
Listening to station presets
You will need to have some presets stored to do
this. See
Saving station presets on page 41 if
you haven’t done this already.
1 Press AM or FM to select the tuner.
2 Press (SHIFT +) CLASS (VSX-516 model) /
CLASS (VSX-416 model) to select the class in
which the station is stored.
Press repeatedly to cycle through classes A, B
and C.
3 Press ST+/– (VSX-516 model) / STATION
+/– (VSX-416 model) to select the station
preset you want.
Changing the frequency step
If you find that you can’t tune into stations
successfully, the frequency step may not be
suitable for your country/region. Here’s how to
switch the setting:
1 Switch the receiver into standby.
2 On the front panel, press STANDBY/
ON while you press and hold the TUNER EDIT
button.
The channel tuning step alternates between
10K STEP and 9K STEP each time you do this.
VSX_516.book.fm 42 ページ ２００６年２月２１日 火曜日 午後４時５２分