Pioneer VSX-416-S/-K - Manual (Page 25)

Controls and displays 05
25
En
English
Français
Deutsch
Nederlands
Italiano
Español
HDD/DVD*
These buttons switch between the hard
disk and DVD controls for DVD/HDD
recorders.
REC STOP*
Stops recording.
8 Number buttons and other component
controls
Use the number buttons to directly select a
radio frequency (page 41) or the tracks on a
CD, DVD, etc.
DISC (ENTER) can be used to enter
commands for TV or DTV, and can also be
used to select a disc in a multi-CD player.
TUNER DISP*
Switches between named station presets
and radio frequencies (page 42).
CLASS*
Switches between the three banks
(classes) of radio station presets (page 41).
MPX*
Switches between stereo and mono
reception of FM broadcasts. If the signal is
weak then switching to mono will improve
the sound quality (page 41).
D. ACCESS*
After pressing, you can access a radio
station directly using the number buttons
(page 41).
9 INFO
Use to bring up information screens on a
digital TV.
10 SHIFT
Press to access the ‘boxed’ commands (above
the buttons) on the remote. These buttons are
marked with an asterisk (
* ) in this section.
11 Remote control LED
Lights when a command is sent from the
remote control.
12 SOURCE
Press to turn on/off other components
connected to the receiver (see page 44 for
more on this).
13 RECEIVER
Switches the remote to control the receiver
(used to select the green commands above the
number buttons (
SETUP , etc). Also use this
button to set up surround sound (page 8,
page 34).
14 TV CONTROL buttons
These buttons are dedicated to control the TV
assigned to the
TV CTRL button. Thus if you
only have one TV to hook up to this system
assign it to the
TV CTRL MULT CONTROL
button. If you have two TVs, assign the main TV
to the
TV CTRL button (see page 44 for more
on this).
Use to turn on/off the power of the TV.
INPUT SELECT
Use to select the TV input signal.
TV CH +/–
Use to select channels.
TV VOL +/–
Use to adjust the volume on your TV.
VSX_516.book.fm 25 ページ ２００６年２月２１日 火曜日 午後４時５２分