Promise Technology FastTrak TX2300 - Manual (Page 95)

Chapter 5: WebPAM
89
The information tab displays the following information:
•
Enclosure Type – The manufacturer’s model name or number.
• Fan Speed – The RPM of the enclosure’s cooling fans.
• Temperature – The internal temperature of the enclosure. Each reading
reflects a separate measurement.
• Power Status – The voltages supplied by the enclosure’s 12V and 5V
systems.
The Fan, Temperature and Power icons change color when an error is
indicated, as shown below.
For more information on Enclosures, replacing disk drives and other repair
operations, refer to the SuperSwap User Manual.
LEDs
State Status Activity Enclosure
Green Disk drive is present
and ready Disk drive is present
and ready Normal status
Blinking n/a Read/write activity n/a
Amber Disk drive:
•
is spinning up
• is critical
• is rebuilding
• reports a SMART
error
n/a 1 incident
(see below)
Enclosure is critical
but still functional
Attention required
Red Disk drive:
•
is offline
• is not installed
n/a 2 or more incidents
(see below)
Dark Power is off Disk drive:
•
has failed
• is not installed
Disk drives are
spinning up
An incident refers to one occurrence of out-of-range voltage, temperature or fan
speed. Any incident requires immediate attention.
Fan Error Temperature Error Power Error