Philips MX5800SA/21 - Manual (Page 39)

39
English
Enabling Play once/Play Always
You can enable or disable viewing of a specific
disc. The DVD system can memorise settings
for 120 discs. When you select ‘Play Always’,
the disc currently in the player moves to the
top of the list. When the list is full and you add
a new disc, the last disc in the list will drop out
of the list.
1
Insert a disc.
➜ The Access Control message will appear on
the TV screen.
2
Press 3 4 to select ‘Play once’ or ‘Play always’.
Then, enter the four-digit code.
➜ ‘Play once’ - the disc can play as long as it is
in the disc tray and the DVD system power is
on.
➜ ‘Play always’ - the disc will play always. even
the Child Lock is set to (lock).
3
If you later want to lock the disc so it will not
play always, insert the disc and press Ç while
the safe icon appears on the TV screen.
➜ Locked icon will appear. You may need to
remove the disc or turn off the power before
the disc is completely locked. The next time
when you insert the disc, it will not play unless
you enter the four-digit code.
Changing the country
If a disc has Parental Level coding, the codings
are applicable only for the country specified on
the disc. The disc manufacturer sets these
codings. For example, a disc may be coded at
level 3 for United States. So, for some discs,
you may need to choose the country for which
the disc is coded in order for the disc to play
at the Parental Level you select (see page 34).
1
In disc mode, press SYSTEM MENU.
2
Select icon and press 4.
3
Use the joystick (1 2 3 4) on the remote to
navigate in the menu.
Move to and press 2.
Move to ‘Access Control’ and press 2.
1en 1en st 1
Access control
Status window
PBC
Help text
[ ] [ ] [ ] [ ]
Enter code
4
Use the numeric keypad (0-9) to enter the
four-digit code. You may have to enter the
same code, exactly, twice.
➜ If not successful, see page 36 “Changing the
password”.
5
Move to ‘Change country’ and press 2.
1en 1en st 1
Access control
Status window
PBC
Help text
Child lock
Parental level
Change country
Change code
6
Press
3 4 to select the country for which the
disc is coded, then press OK.
7
Press SYSTEM MENU again to remove the
menu.
DVD Menu Options