Philips MX5800SA/21 - Manual (Page 19)

19
English
Step 3: Setting the TV
IMPORTANT!
Make sure you have completed all the
necessary connections. (See pages 12~13
“Connecting TV”).
1
Adjust SOURCE control until “ DISC X”
appears on the display panel (or press
DISC/MEDIA on the remote).
2
Turn on the TV and set to the correct video-in
channel. You should see the blue Philips DVD
background screen on the TV.
➜ Usually this channel is between the lowest
and highest channels and may be called
FRONT, A/V IN, or VIDEO. See your TV manual
for more details.
➜ Or, you may go to channel 1 on your TV,
then press the Channel down button
repeatedly until you see the Video In channel.
➜ Or, the TV remote control may have a
button or switch that chooses different video
modes.
➜ Or, set the TV to channel 3 or 4 if you are
using an RF modulator.
Changing the NTSC / PAL setting via
the remote control
TV/AV
DISC/
MEDIA TUNER AUX/DI
4 5 6
1 2 3
1 2 ,
1
Press DISC / MEDIA on the remote to enter
disc mode.
➜ Make sure no MP3 disc is in disc tray 1.
➜ Wait until the system finishes reading the
discs before proceeding to next step.
If playback begins, press Ç to stop playback.
2
Press and hold DISC/MEDIA on the remote
until “PAL” or “NTSC” appears on the display
panel.
➜ To change the setting, repeat step
2
.
Selecting the colour system that
corresponds to your TV
This DVD system is compatible with both NTSC
and PAL. In order for a DVD to play on this
DVD system, the colour system of the DVD, the
TV and the DVD system should match.
1
In disc mode, stop playback and press
SYSTEM MENU.
2
Use the joystick (1 2 3 4) on the remote to
navigate in the menu.
3
Select icon and press 4.
Move to and press 2.
Move to ‘TV System’ and press 2.
Auto – Select this if the connected TV is
compatible with both NTSC and PAL (multi-
system). The output format will be in
accordance with the video signal of the disc.
NTSC – Select this if the connected TV is
NTSC system. It will change the video signal of
a PAL disc (VCD only) and output to NTSC
format. Set the ‘Black level shift’ to ‘On’ in
order to improve the colour contrast and
picture when you play an NTSC-compatible
DVD.
PAL – Select this if the connected TV is PAL
system. It will change the video signal of an
NTSC disc and output to PAL format.
4
Select an item and press OK.
To remove the menu
Press SYSTEM MENU.
TV Shape
Black Level shift
Video shift
1en 1en st 1
Personal color
Color settings
TV System
Pal
NTSC
Auto
Digital Crystal Clear
DISC MENU SYSTEM MENU
SEATING ZOOM
PREV NEXT
STOP PLAY/PAUSE
OK
2 3 ,
4
1
Getting Started
➠