Philips MX5800SA/21 - Manual (Page 21)

21
English
Getting Started
Setting the speakers’ channels
You can adjust the delay times (centre and
surround only) and volume level for individual
speakers. These adjustments let you optimise
the sound according to your surroundings and
setup. Speaker settings are only active on
Multi-channel audio outputs.
1
Press SURR. (or SURROUND on the front
panel) repeatedly to select ‘Multi-channel’.
2
In disc mode, press SYSTEM MENU.
3
Use the joystick (1 2 3 4) on the remote to
navigate in the menu.
4
Select icon and press 4.
Move to and press 2.
Move to ‘Speakers’ and press 2.
5
Press 3 4 to select (Front L&R, Center,
Surround L&R, Sub Woofer), then press 2 to
enter the speaker setting menu.
➜ The test tone will be automatically generated.
6
Use 3 4 to adjust the settings for each
speaker that suit your surround sound needs,
which may includes :
A Adjusting the volume levels for one or both
speakers until the sound evens.
B Turning on or off the sound output.
C Delay time settings - use the longer delay
settings when the surround speakers are
closer to the listener than the front speakers.
7
Press OK to confirm.
To remove the menu
Press SYSTEM MENU.
Step 5: Setting language
preference
You can select your preferred language settings
so that this DVD system will automatically
switch to the language for you whenever you
load a disc. If the language selected is not
available on the disc, the disc’s default setting
language will be used instead. Except the DVD
system’s menu language, it will remain once
selected.
1
In disc mode, stop playback and press
SYSTEM MENU.
2
Use the joystick (1 2 3 4) on the remote to
navigate in the menu.
3
Select icon and press 4.
Move to and press 2.
Move to one of the following and press 2.
– ‘Audio’ (disc’s soundtrack)
– ‘Subtitle’ (disc’s subtitles)
– ‘Menu’ (on screen menu)
4
Press 3 4 to select a language and press OK.
5
Repeat steps
3
~
5
for other settings.
To remove the menu
Press SYSTEM MENU.
Digital output
Analog output
Night mode
Karaoke vocal
Speakers
All
1en 1en st 1
Speaker layout
PCM output
Multi-channel
Off
Off
Square
Settings...
48 kHz
1en 1en st 1
ABC
Audio
Subtitle
Menu English
English
English
1en 1en st 1