Panasonic KX-HCM10 - Manual (Page 44)

Operating Instructions
44
3.3.3 Setting Preset Positioning and Home Positioning
Preset positioning and Home Positioning allow you to fix the lens on a specific
point. This feature can memorize Brightness and White Balance settings. The
preset buttons (1—4) are registered in the factory default.
(1: Upper Left, 2: Upper Right, 3: Lower Left, 4: Lower Right)
All eight preset buttons and home position button can be overridden. Lens moves
to the preset/home position when clicking each registered button. Blue/White
buttons mean Registered/Not registered. Camera Setup window on page 78 can
lock the Preset/Home Positioning features.
Registering or modifying the preset buttons or home position button
1) Click [Program]. Red cancel button appears.
• [Cancel] returns to the Single Camera
screen.
2) Move the lens to a desired position using Pan/Tilt
operation.
3) Select the preset number or home position button
to register or modify.
• After registering or modifying the home
position button, "Success!" appears on the
display. Go to step 7.
4) Enter the name of the preset button.
• Max. 15 characters
• Refer to unavailable character set 1 on
page 96.
• Refer to displayable character set on
page 97.
5) Click [Save].
• [Cancel] returns to the Single Camera
screen without saving.
6) Registered preset button turns blue.
• Go back to step 2 to register or modify
other preset buttons.
7) Click [Cancel] when finished.
2)
1)
3)
4)
5)
6)
7)
3)
Home
Position