Tion, Ring/voice, Automatic call waiting – Panasonic KX-NCP500 User Manual
Page 170: The built-in speaker (ohca), The handset (whisper ohca), Headset operation, Paging deny, Key pad tone set, Background music (bgm), Sion

Item
Programming In-
put
Selection & Parameter
Display Lock
To prevent other people from
seeing your personal speed
dialing directory, call log,
SVM log
9
2
extension PIN
(max. 10 digits) +
0
To unlock
extension PIN
(max. 10 digits) +
1
To lock
One-touch Dialing Assign-
ment Mode Selection
Do you prefer to set the
One-touch dialing only?
#
0
No—Normal (Any Flexible
buttons can be modified.)
1
Yes—Only One-touch dialing
buttons can be modified. However,
to modify them, there is no need to
enter "2" before the number.
*1
Not available for a PS
*2
Only available for KX-T7633/KX-T7636/IP-PTs/KX-DT300 series (except KX-DT333) telephones.
*3
CO button numbers (25–36) are available only when the Add-on Key Module is set up to your telephone.
*4
CO button numbers (25–84) are available only when the Add-on 60 Key Module (KX-NT305) is set up on a KX-NT300 series telephone
(not available for the KX-NT366).
*5
This setting applies to both outside and intercom calls. For intercom calls, this feature must be enabled through system programming.
*6
Only available for certain digital proprietary telephone users.
*7
Only available for KX-NT300 series (except KX-NT321)/KX-DT343/KX-DT346 telephones.
*8
Registering and canceling a Bluetooth wireless headset may take time. Please avoid any interruption during that time by, for example,
going off-hook.
CAUTION
There is a risk that fraudulent telephone calls will be made if a third party discovers your pass-
word (extension PIN).
The cost of such calls will be billed to the owner/renter of the PBX.
To protect the PBX from this kind of fraudulent use, we strongly recommend:
a.
Keeping your PIN secret.
b.
Selecting a complex, random PIN that cannot be easily guessed.
c.
Changing your PIN regularly.
•
After the program number is entered, the program title is displayed.
The programming screen can be changed with the Navigator Key (Up or Down).
•
You can select the parameter with the Navigator Key (Up or Down) instead of entering a num-
ber.
170
Operating Manual
Document Version 2008-09
3.1.2 Personal Programming