Philips DVD1010 - Manual (Page 19)

English
PREPARATION 21
PAL/NTSC settings
You can switch the PAL/NTSC setting of the player to match the video
signal of your TV in order to allow the On Screen Display to appear in
the correct format on your screen.
● To change the NTSC/PAL setting, turn the player OFF.
● Simultaneously press the STOP 9 and DNM buttons while you
turn the payer ON.
● After
PAL or NTSC appears on the display panel of the player,
release the STOP 9 and DNM buttons.
● The
PAL or NTSC that appears on the display panel is the current
setting of the player.
● You can change the current setting by pressing DNM within
5 seconds.