Philips VR752/07 - Manual (Page 19)

19 EN
Programming a recording with
'TURBO TIMER'
With Turbo Timer, programming a recording that
takes place within the next 24 hours is quick and
easy. You don’t even need to switch your TV 'on'
as the necessary information will appear in the
VCR display. (the figures below are only shown
as examples)
1. 1. Press .
'StA' will briefly appear
in the video recorder
display. After 2 sec-
onds, start time will
appear (default setting
is current time). Set the
time you want to start
recording using
.
2. 2. Press .
'End' will briefly appear
in the video recorder
display. After 2 sec-
onds, the end time will
appear (default setting
is same as the start
time). Set the time you
want to finish recording
using or .
3. 3. Press .
'Pro' will briefly appear
in the video recorder
display. After 2 sec-
onds, default program
number will appear in
the display. Set the
desired program num-
ber using
or
.
4. 4. Press .
The program number you have just set will be
displayed.
5. 5. Insert a cassette with an intact security tab
(unprotected).
6. 6. Switch off with
.
The programmed
recording will only function when the video
recorder is switched off with
. STANDBY/ON y y
STANDBY/ON y y
TURBO TIMER
STOP C-L
PLAY B-K
TURBO TIMER
STOP C-L PLAY B-K
TURBO TIMER
STOP C-L PLAY B-K
TURBO TIMER
PWR.
PWR.
PWR.
PWR.
PWR.
PWR.
PWR.
PWR.
PWR.
Error message: 'FUL'
• If this error message appears after pressing
, then all TIMER blocks are
already programmed. No more recordings can
be programmed. If you want to clear or check a
programmed recording (TIMER block), select
the programme number on 'TIMER LIST' menu
and then press
. CLEAR
TURBO TIMER
Error message: 'Err'
If this error message appears after pressing
, the start time or end time is same
as another recording.
TURBO TIMER
HG491/495BD(EN).qx3 03.12.19 9:54 PM Page 19