Panasonic WV-NS324 - Manual (Page 50)

-51-
■ Auto Pan Setting
Click the [Camera] button in the Setup menu, and then
click the [Auto Pan] button.
START POINT:
1. Take the viewpoint as START POINT by press-
ing the joystick oval button, and adjust ZOOM,
FOCUS and IRIS by pressing the respective
function buttons.
2. Click the [START POINT] button to assign the
starting position.
END POINT:
1. Take the viewpoint as END POINT by pressing
the joystick oval button, and adjust
ZOOM, FOCUS and IRIS by pressing the
respective function buttons.
2. Click the [END POINT] button to assign the
starting position.
AUTO PAN: [ON/OFF] button for confirmation
REVERSE: Set positions from end to start in
reverse order.
■ Preset Setup
You can preset up to 16 viewpoint positions.
1. Click the [Camera] button in the Setup menu, and
then click the [Preset] button.
2. Adjust the angle of view in the same manner as
described for Camera Control.
3. Click the [PROGRAM] button; this registers the
viewpoint as a Preset.
4. Repeat the above steps after selecting a program
number if necessary.
PROGRAM: 1 to 16 selectable
CALL: 1 to 16 selectable
Select a number and click the [CALL] button; this
changes the viewpoint to the position correspon-
ding to the number you selected.