Panasonic WV-NS324 - Manual (Page 49)

-50-
4. Time zone
Enter the time difference between your site
and GMT.
Settings from 0:00 to 13:00 are valid.
Select +/– by pressing the [o] button, and
click the [SET] button.
3. Time Setup
For Manual setting use only:
Enter the month, date, year, hour, minute and sec-
ond, and click the [SET] button.
4. Time Display
Select Time Display ON/OFF by pressing the [o]
button.
ON: Enables the time display on the HTML window.
ON (L-UP): Positioned at upper left.
ON (L-LOW): Positioned at lower left.
ON (R-UP): Positioned at upper right.
ON (R-LOW): Positioned at lower right.
OFF: No time display
5. Time Format
Select the Time format by pressing the [o] button,
and click the [SET] button.
3 time format are available:
MM/DD/YYYY, DD/MM/YYYY or YYYY/MM/DD
MM: month, DD: date, YYYY: year
6. Daylight Saving Time
Click ON or OFF and the [SET] button if necessary.
ON: The time indication is advanced one hour.
OFF: No daylight saving time, or to go back to reg-
ular time.
7. Camera Title
Enter any Camera Title (up to 32 characters), and
click the [SET] button.
■ Multiscreen Setup
1. Click the [Multi Screen] button.
2. Enter IP addresses (you may enter
domain name> here if DNS is turned on.) and cam-
era titles (up to 32 characters) into the respective
lines.
Group A and Group B are available.
You can assign up to 4 cameras to each group.
Camera 1 is assigned automatically.
3. Click the [SET] button.